Advanced
CATALOGUE
>
PERFORMANCE PARTS
>
Exhaust Systems
>
DB Dawg 4-Stroke Noise Inserts
Mxbits are proud to be the importer for Ignition Products and their revolutionary DB Dawg noise reducer. The unique idea is aimed at the 4 stroke riders using tracks which are under noise restrictions yet find it hard to budget for an after-market Q or Enduro 4 stroke exhaust system to meet the new and always lowering noise limits.
The DB Dawg simply fits into your current tail pipe whether it be a stock or after-market performance pipe and lowers the sound of you machine by around 6db, in some cases even 10db! Many people suspect that a noise reduction of this amount would mean power sacrifices but this is proven to be untrue, we have dyno prints for two of the markets most popular machines and the power reduction have been well below 0.5%, in some cases only 0.15%.
Many of today's tracks are under threat due to the noise of the 4 stroke machines, do your part.... Fit the DB Dawg!
DB Dawg Common Questions
Which DB Dawg fits my bike?
Simply measure the bore of your tail pipe outlet from side to side across the middle (in inches) then check with the sizes below as to which insert you require.
Why are the inserts in different colours?
DB Dawg's are colour coded for stock identification only. The inserts are anodised in a light coat and all inserts should fade back to a neutral bronze colour within 5 rides.
Do I still need to repack my silencer frequently?
All tailpipes should be repacked frequently whether they are stock or performance pipes. A poorly repacked tail pipe will not only cause noise issues but will also cause a power loss to your machine. The DB Dawg is not a replacement so you don't have to repack your silencer!
Will my bike need to be re-jetted?
DB Dawg's tend to make most machines run slightly richer, you will need to check your fuel mixture & jetting although in most cases a smaller pilot jet is required**
** Please note this suggestion is only if your machine is running on perfect jetting, Mxbits & Ignition products only use this as a guide line and if you are unsure of your jetting please seek advice from an experienced mechanic.
Important Customer Information **
Mxbits & Ignition Racing do not suggest the use of this product with any Carbon Fibre tail pipe.
DB Dawg Noise Reduction Insert
* Quick Secure Non-Permanent Fixing
* Lowers Noise By 6-10db
* Fits in 5 Minutes
* Complete With Allen Key Required & Fitting Instructions
* Fits & Works In Stock & After Market Pipes Including Q/Enduro Pipes
* No Silencer Mod's Required
* Less than 0.5% Power Reduction
* Fits All 4 Stroke Machines.
** Please note CRF250 06-07 Dual Pipe models require one insert only.
Please Select
DB Dawg Required
DB Dawg 8001 (35mm-40mm) - £34.95
DB Dawg 8002 (40mm-45mm) - £34.95
DB Dawg 8003 (45mm-52mm) - £34.95
DB Dawg 8010B (27mm-32mm) - £39.95
DB Dawg 8010R (30mm-35mm) - £39.95
CRF250 2006-2008 US/Import Spec Only - £39.95
YZF450 2007-2008 (8010B) - £39.95
KTM SX250/450 2006-2008 STOCK PIPE (8031) - £39.95
KTM SX250/400/520/525 2002-2005 (8032) - £39.95
DB Dawg (8100) Pro Circuit Ti-4 - £39.95
DB Dawg (8100GP) Pro Circuit Ti-4 GP - £39.95
DB Dawg (8101) Bills Pipes - £39.95
DB Dawg (8102) DRD/CHM Spark Arrestor Type - £39.95
DB Dawg (8105) FMF Powercore/Pro Circuit/DRD - £44.95
DB Dawg (8107) FMF Factory 4.1 - £44.95
DB Dawg (8109) Leo Vince - £39.95
DB Dawg Leash
The DB Dawg Leash is an adaptable solution to tether the insert safely to most mounting points.
The 10" cable comes complete with mounting bracket
Features outer wire cover to prevent wear to tail pipes
* Keeps your insert in place
* Provided bracket for easy installation
* Long enough to reach most mounting points
* Fully customizable length to your requirement
Price: £6.95
DB Dawg Dyno Charts
Please click on the dyno image to see more DB Dawg dyno charts.
CATALOGUE
>
PERFORMANCE PARTS
>
Exhaust Systems
>
DB Dawg 4-Stroke Noise Inserts
